PART |
Description |
Maker |
FX5545G205 |
Industry Smallest and Low Profile 8W 2.5A DC/DC Buck Converter with High Output Density Power
|
Vishay
|
FX5545G202 |
Industry Smallest and Low Profile 3W DC/DC Boost Converter with High Output Density Power
|
Vishay
|
85513-5011 85513-5012 |
VERT. LOW PROF TRUE SMT JACK 6/4 22 RE 4 CONTACT(S), FEMALE, STRAIGHT TELECOM AND DATACOM CONNECTOR, SURFACE MOUNT, JACK VERT. LOW PROF TRUE SMT JACK 4/4 22 INCH
|
Molex, Inc. MOLEX INC
|
FX5545G005ADJT2E2 FX5545G0054V5B5 FX5545G0054V5B5E |
APL8,RV2.2.1,1.15V,105C SLOW MODE 8BIT MCU 业界最小的超薄5W 1.5A直流/直流降压转换器的高输出功率密 Industry Smallest and Low Profile 5W 1.5A DC/DC Buck Converter with High Output Power Density 业界最小的超薄5W 1.5A直流/直流降压转换器的高输出功率密 9S12C128 TSMC3 GENERAL Plug-In Relay; Contacts:4PDT; Coil Voltage AC Max:120V; Contact Carry Current:120A; Coil Resistance:8000ohm; Relay Terminals:Solder Lug; Relay Mounting:Plug-In; Contact Carrying Power:0.45W; Switch Function:4PDT Industry Smallest and Low Profile 5W 1.5A DC/DC Buck Converter with High Output Power Density
|
Vishay Intertechnology, Inc. Vishay Intertechnology,Inc. VISAY[Vishay Siliconix]
|
MAX8971 |
Industry's Smallest 1.55A 1-Cell Li DC-DC Charger
|
Maxim Integrated Products, Inc.
|
106125-1210 |
LC DPX AD.LOW PROF ZR BEIGE W/RETAINER DUPLEX FIBER OPTIC ADAPTER
|
Molex, Inc.
|
MAX8521EBX |
Smallest TEC Power Drivers for Optical Modules Low Profile Design
|
Maxim Integrated Products
|
PL611S-02-XXXTIR PL611S-02-XXXUC-R PL611S-02-XXXUC |
1.8V-3.3V PicoPLLTM, World’s Smallest Programmable Clock 1.8 - 3.3VPicoPLLTM,世界上最小的可编程时 1.8V-3.3V PicoPLLTM, Worlds Smallest Programmable Clock 1.8 - 3.3V的PicoPLLTM,世界上最小的可编程时 1.8V-3.3V PicoPLLTM, World?? Smallest Programmable Clock
|
PhaseLink, Corp. PhaseLink Corporation
|
SPW08F0D |
Industry Standard SMT package Low thermal resistance
|
Seoul Semiconductor
|
SPW88F0E |
Industry Standard SMT package Low thermal resistance
|
Seoul Semiconductor
|
MP8104DJ |
Ultra Low Power 1.8V, 400KHz Op Amp With Industry Standard Pin-Out
|
Monolithic Power System...
|